CONSOLIDATED BEARING 61840 M C/3 Single Row Ball Bearings

Reference grease quantity Gref:35 cm³; Calculation factor (back-to-back, face-to-face) X2:0.67; a:56.1 mm; d:150 mm; Basic dynamic load rating C:108 kN; Preload class C GC:2960 N; Static axial stiffness, preload class D:814 N/µm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Ma

B1:536 mm; G2:G 1/8; B5:147 mm; d1:800 mm; G:Tr 850x7; d:850 mm; Mass adapter sleeve assembly:594 kg; A:10 mm; Locking device:MS 31/850; Lock nut:HME 31/850;

Stabilizing ring:SR-17-14; End plug (suffix Y):EPR 9; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; A1:88.9 mm; h:34.925 mm; Adapter sleeve assembly:SNW 17x2.13/16; P90°:36.9 kN; L:330.2 mm; da:71.438 mm;

Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:163000 N; D:180.0000 mm; Grease Speed Rating n1:6200 rpm; Oil Speed Rating n2:8800 rpm; B:56.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:220000 N; d:120.000 mm;

d3:360 mm; B5:54 mm; Mass adapter sleeve assembly:20.5 kg; B1:168 mm; B:42 mm; G2:M 6; d1:280 mm; Lock nut:HM 3060; Locking device:MS 3060; d:300 mm;

Specific dynamic load factor K:100 N/mm²; G:M 72x4; l7 min.:78 mm; d4 ≈:92 mm; h1:265 mm; l4 max.:349 mm; Material constant KM:330; dk:92 mm; Basic static load rating C0:530 kN; r1 min.:1 mm;

Specific static load factor K0:20 N/mm²; D:24 mm; Permissible sliding velocity v min.:0.25 m/s; B:18 mm; D1:30 mm; B1:3 mm; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7;

Mass bushing:0.005 kg; Tolerance housing:H7 m/s; d:12 mm; Tolerance shaft:f7 m/s; B:15 mm; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Specific static load factor K0:120 N/mm²; D:14 mm; Specific dynamic load factor K:40 N/mm²;

da:173.037 mm; h:47.625 mm; Cap bolt recommended tightening torque:813.5 N·m; Adapter sleeve assembly:SNW 3038x6.13/16; P120°:133 kN; Pa:42.9 kN; Bearing limiting speed:2400 r/min; P90°:207 kN; Stabilizing ring:2 x 38151-38; Mass pillow block:132 kg;

b:10.5 mm; α:6 °; B:77.775 mm; Basic dynamic load rating C:680 kN; Da max.:133.8 mm; Sealing solution:Triple-lip seals; r1 min.:0.6 mm; Basic static load rating C0:2040 kN; M:6.5 mm; Specific dynamic load factor K:100 N/mm²;

Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; B:49.20 mm; Accessories:No Shield, no Seal; d:85.000 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:124000 N;

Basic Radial Load Rating-Static SCO:3650 N; Basic Radial Load Rating-Dynamic DC:7610 N; Basic Interchange NDH:8014; Old MRC Bearing Number:202FS1; Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Width - Overall B:12.7 mm; Width - Outer Ring B0:11.0 mm; Accessories:8000 One Seal; Basic In

B1:35 mm; d1:30 mm; G:M 35x1.5; Lock nut:KMFE 7 L; d:35 mm; d3:52 mm; Mass adapter sleeve assembly:0.16 kg; B:11.5 mm;

l2 max.:364 mm; C1 max.:48 mm; dk:105 mm; r1 min.:1 mm; G:M 64x4; h:270 mm; d:80 mm; Mass rod end:12 kg; Material constant KM:330; l7 min.:98 mm;

R1:115.888 mm; J max.:549.275 mm; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22328 CCK/W33; J min.:492.125 mm; H2:69.85 mm; Stabilizing ring:SR-0-28; Initial grease fill:878.85 g; A2:307.975 mm; h:65.088 mm;